WTFMoogle.com

Didj / Explorer MMC drivers :)

Moogle — Tue, 27 Jul 2010 01:26:53 +0000

I figured out how to patch the MMC drivers properly and build them for the Didj and leapfrog explorer :)

http://www.elinux.org/Didj_and_Explorer_MMC_Patch

Files of interes:

mmc_patch_Kconfig.patch

mmc_patch_lf1000-sdio.patch

now to get hot swapping working

BP Cover the earth

Moogle — Tue, 13 Jul 2010 15:52:43 +0000

:-D oh i love photoshop

Total Endless Wave

Moogle — Tue, 13 Jul 2010 03:29:01 +0000

I feel if I keep editing this song I may ruin it…

TotalEndlessWave.mp3

Over volt your Explorer?

Moogle — Mon, 12 Jul 2010 20:36:14 +0000

Here are some test points for to check if you manage to over volt your explorer.

I managed to blow out one of the regulators already X_X I did how ever replace it with one from a Didj :)

What the f*#$ apple?!??

Moogle — Wed, 07 Jul 2010 23:31:35 +0000

Upgraded my ipod touch to 4.0…
all my music is on my ipod still… i cant listen to it…

and now this when i try to sync my ipod…

Never in my life would i ever purchase anything to do with “Winnie-the-Pooh” so what the f*#$ apple!!???

Leapfrog Explorer USB Pinouts

Moogle — Tue, 06 Jul 2010 20:58:10 +0000

I have figured out the pin outs to the usb host on the Explorer.

proper pinouts are

This the little adapter I made

usb 1-1: new full speed USB device using lf1000-ohci and address 46 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected


~ # cat /proc/bus/usb/devices
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2

B:  Alloc=  0/900 us ( 0%), #Int=  1, #Iso=  0

D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1

P:  Vendor=1d6b ProdID=0001 Rev= 2.06

S:  Manufacturer=Linux 2.6.31-leapfrog ohci_hcd

S:  Product=LF1000 OHCI

S:  SerialNumber=lf1000-usb

C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA

I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 47 Spd=12  MxCh= 4

D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1

P:  Vendor=050f ProdID=0003 Rev= 1.00

C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA

I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=255ms

T: Bus=01 Lev=02 Prnt=47 Port=03 Cnt=01 Dev#= 50 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0846 ProdID=4240 Rev=10.40 S: Manufacturer=GlobespanVirata S: Product=NETGEAR WG111 S: SerialNumber=3887-0000 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 5 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=1ms

Leapfrog explorer compatible with DJHI!

Moogle — Tue, 06 Jul 2010 18:23:20 +0000

Yes it is true! the new Leapfrog explorer uses the same cartridge as the DIDJ! So far I have tested the serial and it works great.

I took my explorer apart

I love how the lcd is put into this simple module

New server up and running!

admin — Sun, 27 Jun 2010 21:11:34 +0000

Woot! Finally had some time to transfer all the backups to the new server!

A lot of links imported wrong so links to files on the server might not work right.

File Paths

working on still having the arduino web server available some how.

Arduino Web Server

A slow week

Moogle — Wed, 02 Jun 2010 16:51:46 +0000

I have family over from out of state so things might be a bit slow this week with orders being built and shipped out.

Yesterday I managed to damage my test didj with a slightly out of spec board X_x Edge wasn’t flanged enough and bent several of the pins funny in the connector.

Anyone have a damaged Didj with a good connector they don’t want?

DJHI Pre Orders Shipped!

Moogle — Wed, 19 May 2010 23:11:04 +0000

The last of the Pre Ordered DJHI have been shipped out today !

Now i can focus on the items in the build que