Archive for July, 2010
Behind the scenes
by Moogle on Jul.30, 2010, under Didj, Electronics
so what is moogle currently working on?
well now that you ask :)
GPS on the LX!!
it is as simple as
modprobe ftdi_sio.ko
and
stty -F /dev/ttyUSB1 raw ispeed 38400 ospeed 38400 -ignpar cs8 -cstopb then
cat /dev/ttyUSB1
and you have the data from the FMP04 GPS module streaming to your terminal :)
now to get gpsd compiled for the LX and the real fun can begin.
the surface has only begun to be scratched ! Arduino mobile development and programming anyone?
Didj / Explorer MMC drivers :)
by Moogle on Jul.26, 2010, under Didj
I figured out how to patch the MMC drivers properly and build them for the Didj and leapfrog explorer :)
http://www.elinux.org/Didj_and_Explorer_MMC_Patch
Files of interes:
now to get hot swapping working
Total Endless Wave
by Moogle on Jul.12, 2010, under Music
I feel if I keep editing this song I may ruin it…
Over volt your Explorer?
by Moogle on Jul.12, 2010, under Didj
Here are some test points for to check if you manage to over volt your explorer.
I managed to blow out one of the regulators already X_X I did how ever replace it with one from a Didj :)
What the f*#$ apple?!??
by Moogle on Jul.07, 2010, under Life, Music
Upgraded my ipod touch to 4.0…
all my music is on my ipod still… i cant listen to it…
and now this when i try to sync my ipod…
Never in my life would i ever purchase anything to do with “Winnie-the-Pooh” so what the f*#$ apple!!???
Leapfrog Explorer USB Pinouts
by Moogle on Jul.06, 2010, under Didj
I have figured out the pin outs to the usb host on the Explorer.
proper pinouts are
This the little adapter I made
usb 1-1: new full speed USB device using lf1000-ohci and address 46
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
~ # cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev= 2.06
S: Manufacturer=Linux 2.6.31-leapfrog ohci_hcd
S: Product=LF1000 OHCI
S: SerialNumber=lf1000-usb
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 47 Spd=12 MxCh= 4
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=050f ProdID=0003 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=02 Prnt=47 Port=03 Cnt=01 Dev#= 50 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0846 ProdID=4240 Rev=10.40
S: Manufacturer=GlobespanVirata
S: Product=NETGEAR WG111
S: SerialNumber=3887-0000
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 5 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
Leapfrog explorer compatible with DJHI!
by Moogle on Jul.06, 2010, under Didj
Yes it is true! the new Leapfrog explorer uses the same cartridge as the DIDJ! So far I have tested the serial and it works great.
I took my explorer apart
I love how the lcd is put into this simple module
