October 21

Small Gasifer Test

I wanted to see how small I could make a Gasifer  So I started off with a simple can in a can ontop of a can

DSCN5104This was the original design braze welded together. The idea is that the gases would pre heat any  fuel and cool down a bit in the process.


DSCN5106This would have worked well in theory but there was a problem with the construction.

DSCN5105

The spacing between the cans was not enough to capture the gasses I wanted.
So here is Version 2.0 made slightly bigger and more reliable
DSCN5107
Much bigger burning chamber and better ash control.DSCN5108Welded solid with my flux wire welder :)
DSCN5109Flow of gases
DSCNoriginal post
https://wtfmoogle.com/?p=462

Leave a Reply